| Nominal total thickness: .040 ±
.005 inches (45 ± 5 mi0ls)
Standard weight: 32.25 ± 1.5 ounces per linear
yard
Abrasion resistance: No significant wear after 500,000
double rubs with #8 cotton duck using the Wyzenbeek test method
Anti-Bacterial/Anti-Microbial treatments
-25° F cold crack resistance
Anti-static finish
Sulfide stain resistant
Oil resistant
Width: 54 inches
Roll length: 40 yards
Note: Terms and corresponding data refer to performance in
the specific test indicated and should not be construed to
imply the behavior of this or any other material under actual
conditions. This information is accurate to the best of our
knowledge at the time of printing, but is not intended to
relieve the user from its responsibility to comply with all
procedures applicable to the safe use of this product.
Go to Top |
| Outstanding Bacterial
Resistance |
MOR-GUARD™ protected products contain both
antibacterial and antimicrobial agents that will provide resistance
against the following bacteria, and many others, when tested
using the AATCC method 147-1993.
Bacillus Cersus
Bacillus Mycoides
Escherichia Coli
Salmonella Choleraesuis
Staphylococcus Aureus
Enterococcus Faecalis
Klebsiella Pneumoniae
Proteus Vulgaris
Go to Top
|
| MOR-GUARD™ products
will meet the following flammability specifications: |
Port Authorities of New York and New Jersey
CID-A-A-2950-A (Formerly CCC-A-680a)
Federal Standard 191A Test Method 5903.1
Federal Specification CCC-A-70OJ
FAA Regulation 25.853 (a) and Appendix F, Part 1 (a) (l) (ii)
FMVSS 302
California Flammability Regulation (Bulletin 117, Section
E)
BIFMA Class A
UFAC Class 1
|
